The interior and lid of the hot tub are made from rotationally cast PE plastic (polyethylene plastic). The seating cast inside is insulated with 40 cm foam polystyrene.
PE plastic is very easy to keep clean. Hot tub is provided with a drainage hole and drainage pipe with a tap. The hot tub and the lid are very weather resistant, not being effected by heat or cold. Thanks to the lid of the hot tub, the water of the hot tub heats up more quickly and no debris or dirt gets into the water of the hot tub when the lid is closed.
The external heater of the hot tub made from marine aluminium can be heated with max. 50 cm long wood. In this case the heating time is approx. 4-4.5 hours. When heating with wood briquettes the heating time is approx. one hour less (3-3.5 hours). Briquette consumption is approx. 30 kg. The time needed to heat the hot tub also depends on the time of year, so in winter the heating time can be significantly longer than in summer, when the hot tub heats up faster.
Hot tub Premium, Ø 207 with a grey granite lid
€0.00 fara TVA | €0.00 cu TVA
Hot tub with a lid for 8 persons.
External dimensions of the hot tub Ø 207 cm
External dimensions of the hot tub with a lid 215 cm
Water capacity of the tub 1650 L
Height of the hot tub from the ground 119 cm
Height of the hot tub with a lid from the ground 145 cm
External heater made from marine aluminium (dimensions 65 x 42 x 62 cm)
Length of the chimney 200 cm
Timber casing finished with wood wax
Colour of the interior and lid is grey granite
Water discharge with a tap
Time needed to heat the water temperature from 5 to 38 °C with 50 cm long wood is approx. 4-4.5 hours (with wood briquettes approx. 3-3.5 hours)
Weight of the hot tub with a heater approx. 300 kg
Base frame of the hot tub is made from 45 x 70 cm impregnated timber